The ultimate all-in-one car polish, Tripple is designed to clean, refine, glaze and protect paintwork in minimal time, and in one simple step. An impeccable enhancement and restoration product that’s ideal for the speediest of detailers!
This next generation polishing compound is the choice of professionals and the best 3-in1, 'easy-on, easy-off' formula in the hands of enthusiasts looking to carry out a supreme, single-stage paint enhancement, while adding quick and easy protection at the same time. Packed with deep-cleansing solvents and advanced, fast-acting diminishing abrasives, Tripple is capable of removing the most stubborn stains, the oxidation which causes fading and other underlying contaminants, while gently refining paint and clearcoat layers, eliminating light defects, to leave a high gloss finish.
Application:
Hand Application:
We recommend using either a microfibre or dual foam applicator pad. Apply a small-coin sized drop of product to the applicator and work into the paint with light pressure until the residue turns clear. You may use either circular, or linear hand motions. For best results, confine yourself to working a small area at a time (no larger than 18 by 18 square inch) and leave the product to haze for several minutes before buffing off the residue using a microfibre towel. For maximum polishing performance, use a microfibre applicator or the white side of the dual foam applicator pad. For maximum gloss, or when working on very soft paint types, we recommend to use the black side of the Dual Foam applicator pad for ultimate finishing potential.
Dual Action Polisher:
For application by Dual Action (DA) polisher, we recommend using a light foam finishing or polishing pad. Apply 2-3 small-coin sized drops to the pad, and spread onto a small area of the paint (no larger than 18 by 18 square inch) using the lowest setting on the machine. Afterwards, work the product in using slow, overlapping passes, light pressure and a moderate speed setting (4000 OPMs) until you see the residue starting to turn clear. At this stage, back the speed down to its lowest, or second lowest setting and reduce pressure for one more pass. Leave the residue to haze for a few minutes and buff off using a microfibre towel. For maximum gloss and finishing potential, a foam finishing pad is ideal. For maximum polishing performance, or when working on harder paint types, we would recommend a slightly firmer foam polishing pad.
Rotary Polisher:
For application by Rotary Polisher, we recommend using a light foam finishing or polishing pad. Apply 2-3 small-coin sized drops to the pad and spread onto a small area of the paint (no larger than 18 by 18 square inch) using the lowest speed setting on the machine. Afterwards, increase the speed to a maximum of 1000RPM, working the product in using slow, overlapping passes. Once you see the residue starting to turn clear, back the speed down to its lowest setting for one more pass. Leave the residue to haze for a few minutes and buff off using a microfibre towel. For maximum gloss and finishing potential, a foam finishing pad is ideal. For maximum polishing performance, or when working on harder paint types, we recommend a slightly firmer foam polishing pad.